LEIYUAN Architectural Terracotta Facade Company
LEIYUAN Architectural Terracotta Facade Company

A rounded front edge gives a tiled stair a deliberate, finished transition between tread and riser. LEIYUAN offers terracotta bullnose stair tile options for coordinated stairways, landings and adjoining floors. Start with the 330 x 330 mm reference format and 18 mm nominal thickness, then confirm the selected finish, edge profile and installation requirements for your project.
Product type: Fired-clay stair tread tile with a rounded bullnose front edge.
Reference size: 330 x 330 mm.
Nominal thickness: 18 mm.
Finish options: Natural or glazed, subject to the selected item.
Design coordination: Matching terracotta floor tile options can connect the stairs with adjacent landings and paving.
These dimensions are reference information for this product range. Confirm current availability, dimensional tolerances, the full nosing profile and matching pieces against samples and drawings before ordering. The nominal thickness does not define the overall depth of the rounded front profile.
Illustrative visualization. Confirm color, finish and profile with physical samples.

The bullnose is the curved front edge of the tread tile. It creates a softer visual line than an exposed square-cut edge and brings the warm character of fired clay around the step. Natural variations in tone and texture can give a staircase depth, especially when the tread, riser and landing are considered together.
Choose a finish by reviewing physical samples under the project's lighting. A rounded edge does not establish a slip rating or make a stair safe on its own. Surface texture, wet conditions, step geometry, edge visibility and installation all influence the finished result. Request slip-resistance information for the exact finish and intended use.
Consider the staircase as part of the surrounding floor design. A 330 x 330 mm reference format can help organize a repeated tread module, while matching floor tiles extend the color story across landings, entrances and terraces. Confirm the actual joint layout rather than assuming that every stair dimension will align with the nominal tile size.
Discuss tread widths, riser heights, exposed ends, corners, cuts and transitions when requesting a quotation. If special pieces are needed, supply a dimensioned drawing for a feasibility review. Approve a representative sample range for the proposed finish and agree how color variation will be distributed across the stair.
Illustrative detail of the rounded nosing; not a dimensioned installation drawing.

Terracotta stair tiles can be considered for residential entrances, interior stairs, garden steps and commercial circulation areas when the selected product and installation suit the exposure. Outdoor projects need particular attention to drainage, standing water, temperature changes and, where applicable, freezing conditions. Request relevant product information rather than applying one general durability claim to every finish or location.
Coordinate a stable substrate, compatible bonding and grout materials, support beneath the nosing, movement joints and edge details with the responsible installer or designer. The rounded front must be supported as required by the selected installation system. Plan cleaning and maintenance around the actual surface finish; test any cleaner in a small area before general use.
Email terracottafacade@leiyuan.cn with your stair layout, dimensions, finish preference, estimated quantity and delivery destination. LEIYUAN can review suitable product options, sample needs, available documentation and the proposed supply scope for your inquiry.
For adjoining surfaces, explore Terracotta Floor Tile. For the wider product range, use Download Catalog PDF in the site navigation.
Illustrative coordination of stair and landing finishes. Confirm the selected sample range.

A terracotta pool surround can link the water's edge with adjoining paving and changes in level. Rounded bullnose pieces create a defined coping edge, while coordinated flat tiles carry the warm clay tones across the pool deck, terrace and nearby steps. Review the proposed coping profile, corners, joints and transitions as one layout.
For poolside use, ask LEIYUAN to review the selected product against the project's wet-area requirements. Request relevant information on barefoot slip performance, water absorption and resistance to the planned pool-water treatment and cleaning products. In freezing climates, include the expected exposure in the product review.
Conceptual poolside visualization; confirm the selected product, profile and finish with physical samples.

Begin with the pool perimeter and the width of the coping band. Show straight runs, internal and external corners, curved areas, skimmer positions and any drainage channels on the drawing. Confirm whether corner pieces are available or whether a planned cutting detail is needed. A stair-tread reference size alone does not establish a complete pool-coping system.
Coordinate the coping support, waterproofing interface, movement joints and surface drainage with the pool designer and installer. If tiles will be used below the waterline or on submerged steps, identify that exposure separately when requesting product documentation.
For a quotation, email the pool dimensions, coping length, deck area, step details, preferred color, finish and delivery destination to terracottafacade@leiyuan.cn.
Conceptual edge detail; not a dimensioned installation drawing or a tested pool-system specification.
Please reach us at terracottafacade@leiyuan.cn if you cannot find an answer to your question.
It is a fired-clay tread tile with a rounded front edge. The curved nosing finishes the visible transition between the horizontal tread and the vertical riser.
The reference format for this product is 330 x 330 mm with an 18 mm nominal thickness. Confirm the exact item, tolerances, full edge dimensions and current availability before specification.
Natural and glazed options can be reviewed for the selected product. Ask for physical samples and finish-specific technical information so that appearance and intended exposure can be assessed together.
No. The rounded edge describes the profile, not a tested slip classification. Check the chosen surface under the expected dry or wet conditions and meet the project's stair-design requirements.
Matching terracotta floor tile options can be reviewed for landings and adjacent areas. Confirm dimensions, finish and an acceptable color range across the proposed pieces.
Send the number of steps, tread and riser dimensions, landing area, finish preference, quantity, destination and schedule. Include drawings of corners or exposed ends and identify any samples or product documents you need.
They can be reviewed for a coordinated pool-edge design when the selected item meets the project's exposure and wet-area requirements. Confirm barefoot slip performance, water absorption, pool-water and cleaning-product compatibility, and any freeze exposure. Ask separately about submerged use, coping dimensions, corner pieces and installation details.
Copyright © 2011–2026 China Leiyuan Architectural Terracotta Facade Company. All rights reserved.